<dd id="rw0xn"></dd>
If you would like to learn more about the IAEA’s work, sign up for our weekly updates containing our most important news, multimedia and more.
Technical Reports Series No. 313
English STI/DOC/010/313 | 92-0-145190-3
| € 35.00 | Date published: 1990Laboratory testing of uranium ores is an essential step in the economic evaluation of uranium occurrences and in the development of a project for the production of uranium concentrates. Although these tests represent only a small proportion of the total cost of a project, their proper planning, execution and interpretation are of crucial importance. This manual discusses the objectives of metallurgical laboratory ore testing, shows the specific role of these tests in the development of a project and provides practical instructions for performing the tests and for interpreting their results. Guidelines on the design of a metallurgical laboratory, on the equipment required to perform the tests and on laboratory safety are also given.
Contents: 1. Introduction; 2. Sampling and characterization; 3. Size reduction; 4. Leaching; 5. Solid–liquid separation and washing; 6. Uranium recovery from leach solutions; 7. Uranium recovery by ion exchange; 8. Uranium recovery by solvent extraction; 9. Precipitation; 10. Alternative techniques; 11. Flow sheets and material balances; 12. Report writing; Appendix I: Laboratory safety; Appendix II: Guidelines for laboratory design; Appendix III: Suggested laboratory equipment and supplies.
More Information on reusing IAEA copyright material.
Orders and requests for information may also be addressed to:
Publishing Section
International Atomic Energy Agency
Vienna International Centre
PO Box 100, A-1400 Vienna,
Austria
Tel.: +43 1 2600 22529, +43 1 2600 22530
Email: sales.publications@iaea.org
<dd id="rw0xn"></dd>
